High-speed low-voltage electro-optic modulator with a polymer-infiltrated silicon photonic crystal waveguide

The paper concerns the design and the study of a silicon-based electro-optical modulator, using a photonic crystal waveguide containing a slot which is infiltrated with a nonlinear polymer. The research topic is important for the physics of photonic systems and for applications to integrated optics and to telecommunications. Abstract: A novel electro-optic silicon-based modulator with a bandwidth of 78GHz, a drive voltage amplitude of 1V and a length of only 80 μm is proposed. Such record data allow 100Gbit/s transmission and can be achieved by exploiting a combination of several physical effects. First, we rely on the fast and strong nonlinearities of polymers infiltrated into silicon, rather than on the slower free-carrier effect in silicon. Second, we use a Mach-Zehnder interferometer with slotted slow-light waveguides for minimizing the modulator length, but nonetheless providing a long interaction time for modulation field and optical mode. Third, with this short modulator length we avoid bandwidth limitations by RC time constants. The slow-light waveguides are based on a photonic crystal. A polymer-filled narrow slot in the waveguide center forms the interaction region, where both the optical mode and the microwave modulation field are strongly confined to. The waveguides are designed to have a low optical group velocity and negligible dispersion over a 1THz bandwidth.With an adiabatic taper we significantly enhance the coupling to the slow light mode. The feasibility of broadband slow-light transmission and efficient taper coupling has been previously demonstrated by us with calculations and microwave model experiments, where fabrication-induced disorder of the photonic crystal was taken into account.