In this paper, a dedicated pulse width modulation (PWM) technique specifically designed for single-phase (or four wire three-phase) multilevel Cascaded H-Bridge Converters is presented. The aim of the proposed technique is to minimize the DC-Link voltage unbalance, independently from the amplitude of the DC-Link voltage reference, and compensate the switching device voltage drops and on-state resistances. Such compensation can be used to achieve an increase in the waveform quality of the converter. This is particularly useful in high-power low supply voltage applications where a low switching frequency is used. The DC-Link voltage balancing capability of the method removes the requirement for additional control loops to actively balance the DC-Link voltage on each H-Bridge, simplifying the control structure. The proposed modulation technique has been validated through the use of simulation and extensive experimental testing to confirm its effectiveness. © 1982-2012 IEEE.
Active DC voltage balancing PWM technique for high-power cascaded multilevel converters
Zanchetta P.
;Watson A.;
2014-01-01
Abstract
In this paper, a dedicated pulse width modulation (PWM) technique specifically designed for single-phase (or four wire three-phase) multilevel Cascaded H-Bridge Converters is presented. The aim of the proposed technique is to minimize the DC-Link voltage unbalance, independently from the amplitude of the DC-Link voltage reference, and compensate the switching device voltage drops and on-state resistances. Such compensation can be used to achieve an increase in the waveform quality of the converter. This is particularly useful in high-power low supply voltage applications where a low switching frequency is used. The DC-Link voltage balancing capability of the method removes the requirement for additional control loops to actively balance the DC-Link voltage on each H-Bridge, simplifying the control structure. The proposed modulation technique has been validated through the use of simulation and extensive experimental testing to confirm its effectiveness. © 1982-2012 IEEE.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
