CINECA IRIS Institutional Research Information System
IRIS è la soluzione IT che facilita la raccolta e la gestione dei dati relativi alle attività e ai prodotti della ricerca. Fornisce a ricercatori, amministratori e valutatori gli strumenti per monitorare i risultati della ricerca, aumentarne la visibilità e allocare in modo efficace le risorse disponibili.
EnglishA sampling gas hadron calorimeter with tower readout geometry has been constructed for a photoproduction experiment, E687, at Fermilab. This experiment has run in the Wide Band photon beam with photons of maximum energy of 450 GeV. The calorimeter consists of 28 120×82×1.75 in. Fe plates interspersed with planes of extruded aluminum proportional tubes. Capacitively induced signals on electrode pads with a cylindrical geometry are read out. The preamplifier and shaping electronics, constructed from surface mount devices, are mounted on the detector. The system has a dynamic range that spans the region from minimum ionizing particles (mip) to a few hundred mips. Calibrating the system response was done using muons, electronic test signals, and by recording the pulse height of an 55Fe source with a proportional counter. Results on the details of the performance of the calorimeter and its use as an online trigger are described.
Scheda prodotto non validato
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo
| Titolo: | Performance of the hadron calorimeter for fnal experiment E687 | |
| Autori: | ||
| Data di pubblicazione: | 1990 | |
| Rivista: | ||
| Abstract: | A sampling gas hadron calorimeter with tower readout geometry has been constructed for a photoproduction experiment, E687, at Fermilab. This experiment has run in the Wide Band photon beam with photons of maximum energy of 450 GeV. The calorimeter consists of 28 120×82×1.75 in. Fe plates interspersed with planes of extruded aluminum proportional tubes. Capacitively induced signals on electrode pads with a cylindrical geometry are read out. The preamplifier and shaping electronics, constructed from surface mount devices, are mounted on the detector. The system has a dynamic range that spans the region from minimum ionizing particles (mip) to a few hundred mips. Calibrating the system response was done using muons, electronic test signals, and by recording the pulse height of an 55Fe source with a proportional counter. Results on the details of the performance of the calorimeter and its use as an online trigger are described. | |
| Handle: | http://hdl.handle.net/11571/454632 | |
| Appare nelle tipologie: | 1.1 Articolo in rivista |
File in questo prodotto:
Copyright © 2022