We design and manufacture a silicone model of the human aorta, able to mimic both the geometrical and the mechanical properties of physiological individuals, with a specific focus on reproducing the compliance. In fact, while the models available in the literature exhibit an unrealistic compliant behavior, though they are detailed from the geometrical viewpoint, here the goal is to provide an accurate compliant tool for in vitro testing the devices that interface with the vascular system. A parametric design of the aortic model is obtained based on the available literature data, and the model is manufactured with a specific silicone mixture using rapid prototyping and molding techniques. The manufactured prototype has been tested by means of computed tomography scans for evaluating the matching of the mechanical properties with the desired ones. Results show a high degree of adherence between the imposed and the measured compliance values for each main aortic section. Thus, our work proves the feasibility of the approach, and the possibility to manufacture compliant models that reproduce the mechanical behavior of the aorta for in vitro studies.

A compliant aortic model for in vitro simulations: Design and manufacturing process

MARCONI, STEFANIA;CONTI, MICHELE;Auricchio, Ferdinando
2018-01-01

Abstract

We design and manufacture a silicone model of the human aorta, able to mimic both the geometrical and the mechanical properties of physiological individuals, with a specific focus on reproducing the compliance. In fact, while the models available in the literature exhibit an unrealistic compliant behavior, though they are detailed from the geometrical viewpoint, here the goal is to provide an accurate compliant tool for in vitro testing the devices that interface with the vascular system. A parametric design of the aortic model is obtained based on the available literature data, and the model is manufactured with a specific silicone mixture using rapid prototyping and molding techniques. The manufactured prototype has been tested by means of computed tomography scans for evaluating the matching of the mechanical properties with the desired ones. Results show a high degree of adherence between the imposed and the measured compliance values for each main aortic section. Thus, our work proves the feasibility of the approach, and the possibility to manufacture compliant models that reproduce the mechanical behavior of the aorta for in vitro studies.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11571/1247186
Citazioni
  • ???jsp.display-item.citation.pmc??? 2
  • Scopus 17
  • ???jsp.display-item.citation.isi??? 13
social impact